Table of Contents
Advertisement
Figure 132. Installing a new TIM onto the system processor module
Continue with step "16" on page 148.
15. Use this step to reuse the existing undamaged TIM and heat sink.
a) Using the tweezers, move the old TIM from the clean, dry surface and center it onto the new
system processor module.
The TIM has no preferred up side. The TIM can be placed on the system processor module and
centered as shown in Figure 133 on page 148.
Removing and replacing parts in the 8335-GTW or 8335-GTX 147
Advertisement
Table of Contents
