Table of Contents
Advertisement
Figure 109. Replacing the rack installation support
7. Secure the cable in the retaining clip on the inside wall of the system.
8. Replace the disk drive and fan card.
For instructions, see "Replacing the disk drive and fan card in the 8335-GTW or 8335-GTX system" on
page 74.
What to do next
Prepare the system for operation. For instructions, see "Preparing the 8335-GTC, 8335-GTG, 8335-GTH,
8335-GTW, or 8335-GTX system for operation after you remove and replace internal parts" on page 202.
Removing and replacing the system backplane in the 8335-GTW
Learn how to remove and replace the system backplane in the IBM Power System AC922 (8335-GTW and
8335-GTX) system.
Preparing to remove the system backplane from the 8335-GTW
To prepare the system to remove a system backplane, complete the steps in this procedure.
Before you begin
Before you begin replacing the system backplane, record the system serial number and machine model
type. After you replace the system backplane, you must set the system serial number and machine model
type in the system backplane.
Removing and replacing parts in the 8335-GTW or 8335-GTX 123
Advertisement
Table of Contents
