System Components For Ifps - Siemens SIMATIC HMI Series Operating Instructions Manual

1.6.1

System components for IFPs

Transceiver Unit for extended versions and PRO devices
With the Transceiver Unit you can bridge a distance of up to 100 m between a PC and an
extended version or a PRO device. The Transceiver Unit is mounted close to the PC.
The Transceiver Unit can be attached on a DIN rail or in various positions on a wall using the
fixing accessories supplied.
①
②
③
④
⑤
⑥
⑦
Article number of the Transceiver Unit: 6AV7860-3EH00-0AA0
Scope of delivery
● A Transceiver Unit
● One mounting rail for attachment to DIN rail or wall mounting
● Two retaining elements for strain relief
● One DisplayPort cable, length 0.5 m
● One USB cable Type B connector - Type A connector, length 0.5 m
● A power supply connector 24 V DC, 2-pin
● A ferrite for the power supply cables, white
● One ferrite for the Ethernet line to the IFP, black
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
Hole for the screw to fasten the mounting rail
Guide for the "left" mounting rail
Connection for functional ground
X80 connector for 24 V DC power supply
Opening for fastener for "left" strain relief
X71 RJ45 interface to the IFP
Guide for the "rear" mounting rail
1.6 System components and accessories
⑧
"LNK" LED
⑨
Mounting rail
⑩
Lower elongated hole of the mounting rail
⑪
X70 DisplayPort interface
⑫
Opening for fastener for "right" strain relief
⑬
X60 USB Type B
⑭
Guide for the "right" mounting rail
Overview
19