Appendix; Setting Parameters For Lcd Monitors Of 15 Khz And Above, Example: Wf 470 System - Siemens SCD 1515-E Operating Instruction

5

Appendix

5.1 Setting parameters for LCD monitors of 15 kHz and above, example:
WF 470 system
Switch positions of BNC input sockets:
A1 = ON, A2 = OFF, A3 = ON, A4 = ON, A5 = ON
Select "Utilities" menu using menu key.
Select "Installation of RGB mode" using Enter key.
Press key – the submenu is displayed.
Visible H-pixels = 512
Use the keys to set the correct value.
Press Enter key to confirm the set value.
Visible V-lines = 256
Use the keys to set the correct value.
Press Enter key to confirm the set value.
Total H-pixels = 768
Use the keys to set the correct value.
Press Enter key to confirm the set value.
Start H-pixels = 188
Use the keys to set the correct value.
Press Enter key to confirm the set value.
Start V-lines = 39
Use the keys to set the correct value.
Press Enter key to confirm the set value.
LCD-Monitor SCD 1515-E page 53 / 56
Operating Instruction
DOC-No.: B30058DE8.doc