Accessories - Siemens SIMATIC HMI Series Operating Instructions Manual

Additional information
Additional Extension Units and information on system components for all-round protected
devices with degree of protection IP65 and Enclosure Type 4X/12 (indoor use only) are
available on the Internet
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10268745).
1.6.3

Accessories

Each device comes with an accessory pack containing the necessary accessories.
Note
This section contains a selection of accessories suitable for your device. You can find
additional versions of this selection and the complete accessories portfolio in the Industry
Mall on the Internet
(https://mall.industry.siemens.com/mall/en/WW/Catalog/Products/10144445). Details
such as the delivery quantity and technical specifications of accessories can be found in the
Industry Mall under the respective article numbers.
Accessories for all IFPs
Name
DVI line
DisplayPort line
USB cable
Type A connector - Type B connector
Power supply connector 2-pin
Power supply connector 2x2-pin
Touch pen
Accessories for built-in devices
Name
Set with steel mounting clips
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
1.6 System components and accessories
Specification
3 m long
5 m long
3 m long
5 m long
3 m long
5 m long
Screw-type connection
Spring-loaded terminals
For capacitive and resistive touch
screen
Overview
Article number
6AV7860-0BH30-0AA0
6AV7860-0BH50-0AA0
6AV7860-0DH30-0AA0
6AV7860-0DH50-0AA0
6AV7860-0CH30-0AA0
6AV7860-0CH50-0AA0
6AV6671-8XA00-0AX0
6ES7193-4JB00-0AA0
6AV2181-8AV20-0AX0
Article number
6AV6671-8XK00-0AX3
25