Siemens SIMATIC HMI Series Operating Instructions Manual page 86

Technical information
7.1 Certificates and approvals
IECEx approval
For an IFP with "IECEx" marking, the following approvals apply according to the following
standards.
● Standards:
– IEC 60079-0:2011
– IEC 60079-15:2010
– IEC 60079-31:2013
● Certifications and approvals:
FCC and Canada
USA
Federal Communications
Commission
Radio Frequency
Interference Statement
Shielded Cables
Modifications
Conditions of Operations This device complies with Part 15 of the FCC Rules. Operation is subject
CANADA
Canadian Notice
Avis Canadien
IEC 61010-2-201
The devices meet selected requirements and criteria of the IEC 61010 standard, safety
regulations for electrical equipment for measurement, control and laboratory use - Part
2-201: Special requirements for control equipment.
86
Ex nA IIC T4 Gc
Ex tc IIIC T70°C Dc
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
Shielded cables must be used with this equipment to maintain compliance
with FCC regulations.
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This Class A digital apparatus complies with Canadian ICES-003 (A).
Cet appareil numérique de la classe A est conforme à la norme NMB-
003 (A) du Canada.
Operating Instructions, 08/2019, A5E46641410-AA
IFP V2, IFP V2 PRO