Fasten Built-In Device Using Mounting Clips - Siemens SIMATIC HMI Series Operating Instructions Manual

Device
24" built-in devices
3.2.3

Fasten built-in device using mounting clips

Requirement
● All packaging components and protective films have been removed from the device.
● The mounting clips included in the accessory kit are to hand.
● Torque screwdriver with slit insert size 2
Procedure
Note
If the mounting seal is damaged, the degree of protection is not guaranteed.
IFP V2, IFP V2 PRO
Operating Instructions, 08/2019, A5E46641410-AA
Positions of the mounting clips
Installing and connecting the device
3.2 Installing the built-in unit
47