6.2.19 Second Brake Flank
6.2.20 P-Divider
6.2.21 I-Divider
34
With this parameter the second brake flank of the sewing drive can be
defined.
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the second brake flank with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the P-divider of the sewing drive can be defined.
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the P-divider with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.
With this parameter the I-divider of the sewing drive can be defined.
Order of operations
–
Hold down the "Y" key and tap the "E" key.
The parameter menu is turned on.
–
Advance to the desired parameter through repeated pressing of
the "Y" key.
–
Enter the I-divider with the 0 to 9 keys.
After the entry of the third number the entry is automatically
concluded.
If fewer than 3 numbers are to be entered, conclude the entry with
the "E" key.