Install The Com Port (Optional) - Siemens SIMATIC IPC1047 Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC1047:
- Quick install manual (2 pages) ,
- Operating instructions manual (136 pages)
Table of Contents
Advertisement
Expanding and assigning parameters to the device
6.6 2. Install the COM port (optional)
6.6
2. Install the COM port (optional)
Requirement
● The device is open in accordance with section "Open the device. (Page 52)".
● Tx10 screwdriver
Procedure
1. Remove the screw on slot 1.
2. Remove the associated slot bracket, similar to the figure
3. Insert the slot bracket with the pin connector of the COM interface and screw it in place.
4. Insert the plug connector onto the marked location on the motherboard.
No other steps are needed for installing the COM interface.
72
②
.
Operating Instructions, 09/2018, A5E45118479-AA
SIMATIC IPC1047
Advertisement
Table of Contents
