Technical Specifications; Certificates And Approvals - Siemens SIMATIC IPC1047 Operating Instructions Manual

Technical specifications

8.1

Certificates and approvals

Note on rating plate
Note
Approvals on the rating plate
The following overview provides information on possible approvals.
Only the approvals printed on the rating plate apply to the device.
ISO 9001 certificate
The Siemens quality management system for our entire product creation process
(development, production and sales) meets the requirements of ISO 9001.
This has been certified by DQS (the German society for the certification of quality
management systems).
Software license agreements
If the device is supplied with installed software, observe the enclosed license agreements.
USA and Canada
The following approvals are available for the device:
Product safety
Approval (NRTL / CSA)
EMC
USA (FCC)
Federal
Communications
Commission
Radio Frequency
Interference Statement
SIMATIC IPC1047
Operating Instructions, 09/2018, A5E45118479-AA
Nationally Recognized Testing Laboratory (NRTL)
According to UL 60950-1 and CAN/CSA-C22.2 No. 60950-1-07
This device complies with part 15 of the FCC Rules:
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
8
101