Removing And Installing The Self-Ventilating Graphics Card - Siemens SIMATIC IPC1047 Operating Instructions Manual

6.5.5

Removing and installing the self-ventilating graphics card

Requirement
● The device is open in accordance with section "Open the device. (Page 52)".
● Tx10 screwdriver
● Phillips screwdriver
Procedure
Read section "ESD guideline (Page 103)".
Danger of injury by rotating parts
The fan blades rotate in the self-ventilated graphics card. Even after the device is switched
off, the fan blades continue to rotate for a while. There is a risk of injury at the rotating parts
of the fan, e.g. through cutting.
• Wait until the fan blades come to a standstill.
• Only then should you remove the graphics card.
SIMATIC IPC1047
Operating Instructions, 09/2018, A5E45118479-AA
WARNING
Expanding and assigning parameters to the device
6.5 Expansion cards
67