Remove And Install Fanless Graphics Card (Optional) - Siemens SIMATIC IPC1047 Operating Instructions Manual
Hide thumbs
Also See for SIMATIC IPC1047:
- Quick install manual (2 pages) ,
- Operating instructions manual (136 pages)
Table of Contents
Advertisement
6.5.4
Remove and install fanless graphics card (optional)
Requirement
● The device is open in accordance with section "Open the device. (Page 52)".
● Tx10 screwdriver
● Phillips screwdriver
Procedure
Read section "ESD guideline (Page 103)".
Removal
1. Remove the 2 screws of the
expansion card.
Also remove the 2 screws of
the fan bracket plate on the
outside.
2. NOTICE: Do not interchange
the SATA connectors during
installation:
Make a note of which SATA
connector is connected to
which slot.
Detach the SATA cables below
the fan.
3. Unhook the fan in the
downward direction.
SIMATIC IPC1047
Operating Instructions, 09/2018, A5E45118479-AA
Expanding and assigning parameters to the device
6.5 Expansion cards
65
Advertisement
Table of Contents
