Raid1 System; Windows Action Center; Switching Off The Device - Siemens SIMATIC IPC1047 Operating Instructions Manual

Commissioning the device

4.5 Windows Action Center

4.4.3.4

RAID1 system

The system can be configured as RAID1 (data mirroring on two hard disk drives). This
means that if there is a defective hard disk or there are cable problems, the system can
continue to operate in one channel and achieve a high degree of availability. You can find
additional information in chapter "Manage onboard RAID system (Page 76)".
4.5 Windows Action Center
Warning from the Windows Action Center
The Action Center checks the status of the device with regard to the important safety
aspects listed below. If a problem is found, the Action Center provides recommendations on
how you can better protect the device.
● Firewall: The Windows Firewall adds protection to the device by blocking network or
Internet access to the device by unauthorized users. The firewall is enabled in the
delivery state.
● Antivirus software: Antivirus programs add protection to the device by searching for and
eliminating viruses and other security threats. No antivirus software is installed in the
delivery state.
● Automatic updates: Using the Automatic Update feature allows Windows to regularly
search for the latest critical updates for the device and to install them automatically.
● User Account Control: User Account Control issues a warning when programs attempt to
modify important Windows settings. You can then either acknowledge this warning or
prevent the program from changing the Windows settings.
4.6

Switching off the device

Shutting down the operating system
For Windows operating systems:
1. Press the key combination <Ctrl+Alt+Del>.
2. Select "Shutdown".
● Alternatively, briefly press the on/off button (unless otherwise configured in the power
options). Information on the position of the button is available in the section "Device views
(Page 14)".
For non-Windows operating systems:
● Briefly press the on/off button.
The operating system is shut down. The "POWER" LED goes out. The device is switched off
but not fully disconnected from the line voltage.
46
Operating Instructions, 09/2018, A5E45118479-AA
SIMATIC IPC1047