Reverse - Brady BMP 61 User Manual

Frames do not display on the editing screen. Use
frames.
Note: Frames do not display edge to edge, but may appear slightly offset from the very edge of
the label.
To remove the Frame:
1. Navigate to the label or area that contains the Frame.
2. Press Label.
OR
Press FN and Area.
3. Choose Frame > None.

Reverse

The Reverse function switches the foreground and background colors of data on a label, based on the
color ribbon and label supply installed.
For instance, black lettering on a yellow background, if reversed, would print yellow lettering on a black
background.
You can apply Reverse formatting to areas or labels. When adding another area or label, the reverse
function status carries over.
Note: This feature is only available when continuous supply is installed in the printer. Reverse
cannot be applied to a barcode or if die-cut label supply is installed in the printer.
To apply or remove Reverse formatting to a label or area:,
1. Press Label.
OR
Press FN and Area.
2. Navigate to Reverse and choose On or Off.
®
BMP 61 User's Manual
"Print Preview" on page 65
Figure 3-7. Reverse text
Formatting
Labels and Areas
to view the label or area
44