Cancel Functions; Error Messages; Default Settings; Font Autosize - Brady BMP 61 User Manual

Getting Started

Font Autosize

Cancel Functions

Backspace is also used to cancel functions, a menu, or dialog box. When pressing Backspace in the
middle of a function, you are walked out of the function a screen at a time. You may have to press
Backspace several times to completely exit the function. (See "Cancel a Menu or Dialog Box" on
page 25 for information on how to cancel functions using the touch screen.)

Error Messages

If a function does not operate under current conditions, an error or information message displays
indicating the problem and offering situational advice. Read the message carefully and follow the
instructions. Press Enter or tap the error message on the screen to remove it.

Default Settings

Default settings are determined by the printer for the installed label supply. When the label supply
and/or application label type is reloaded, it will return to these settings. The font and its attributes can
also be set as a default using Font Settings.
Font Autosize
If you have not set a default font size, autosize starts with the largest font size that fits on the label. As
more data is added to a line of text, the font size automatically decreases a point at a time until a new
line is started or the smallest font size is reached. When working with autosize and multiple lines of
text, all lines on a label maintain the same size.
Autosize is turned on for all labels and is displayed as an 'A' in front of the font size in the upper left
corner of the Header bar.
Figure 2-1. Text entered with Autosize turned on
®
BMP 61 User's Manual
30