Breaker Box - Brady BMP 61 User Manual

Breaker Box

Breakers are usually arranged in two columns or along one row, depending on geographic regions.
The breaker positions are numbered left-to-right or top-to-bottom, depending on label orientation. This
numbering system is universal across various competing manufacturers of breaker panels.
To create Breaker Box labels:
1. Press Label Type.
2. Select Breaker Box.
A dialog box displays.
3. In the Breaker Repeat field, enter the width of a standard breaker.
4. In the Number of Breakers field, enter the number of breakers to be labeled.
This produces one continuous strip, separated by the Breaker Repeat width, vertically aligned
for US breaker boxes, or horizontally aligned for EU breaker boxes.
The BMP
breakers to ensure accurate spacing. A single-pole breaker takes up only one space in the
electrical panel, while a double-pole takes up two.
5. If the breakers contain different pole counts, select Variable Pole Count to place a check mark
in the option box.
®
BMP 61 User's Manual
®
61 firmware also includes the pole count to calculate the distance between
Label Types
Breaker Box
80