Label Supply; Loading - Brady BMP 61 User Manual

Label Supply

Brady labels come equipped with smart-cell technology that enables the printer to recognize the type
of label and automatically set label formatting details.
For optimum performance, it is recommended that you use genuine Brady BMP
be loaded with the power on or off.
Note: TLS2200 label supply is forward compatible to BMP
printers. TLS2200 label supply continues to work in TLS2200 and PC-Link.
Before inserting labels, be sure to remove the protective tape covering the leading end of the labels.

Loading

1. To open the printer cover, place your thumb under
the tab and push up.
3. If using anything but a 2-inch width label supply,
slide the media guide to the left until it fits snugly up
against the label roll and clicks into place.
5. With the power on, press the Feed button once to feed label supply under the print head.
6. Close the cover by pushing down on it until it snaps into place.
®
BMP 61 User's Manual
Smart Cell Handle
Media Guide
®
61 and cross-compatible to BMP71
2. With labels coming over the top of the spool, grasp
the smart cell handle and insert the labels straight
into the smart cell reader compartment, gently
pushing until it clicks into place.
Smart Cell
4. Feed the leading edge of the label roll through the
guide slots until it stops.
Note: Make sure the print head is engaged by flipping the
print head lock lever forward (to the left) before inserting
labels into guides.
Introduction
Loading Supplies
®
61 labels. Labels can
Locking Lever
13