Unloading
1. To open the printer cover, put your thumb
under the finger tab and push up.
3. If label spool is not empty, gently rewind the
spool with your finger to back the unused
labels out from under the print head.
5. If you do not want to load any more label supply, close the printer cover by pressing down
until it catches.
®
BMP
61 User's Manual
2. Flip the print head lock lever backward (to
the right) to disengage the print head.
4. Grasp the smart cell handle and gently pull
up out.
Introduction
Loading Supplies
14