Setting Up the Printer English Setting Up the Printer Power is supplied to the BMP71 printer through a battery or through an AC power adapter (included). Loading the Battery 1. Holding the printer by the 2. With the battery label 3.
Turn the top spool of the ribbon downward, as needed, to take up any potential slack. Unload Ribbon 1. Pull up on cover latch Open the cover. 3. Grasping finger tabs of cartridge, pull cartridge out of the ribbon compartment. 11/10/09 BMP71 Quick Start Guide...
Unload Labels 1. Pull up on cover latch. 2. Open the cover. 3. Grasp label spool and pull Power On To turn the printer on or off: 1. Press Power On/Off BMP71 Quick Start Guide 11/10/09...
1. Press the key for the function you want to use. 2. Press left/right navigation keys to move through the main menus. 3. Press up/down navigation keys to move through the sub-menus. 4. To select a menu option, press or ENTER 11/10/09 BMP71 Quick Start Guide...
To select an option from the drop down list: 1. Press OK or Enter to open the drop down list. 2. Use up/down navigation keys to highlight the desired option. 3. Press OK or Enter to select the option. BMP71 Quick Start Guide 11/10/09...
4. Use the up/down navigation keys to select the desired language and press OK or Enter 5. Navigate to the OK button and press OK or Enter To remove the Setup main menus from the screen: 6. Press Clear/Esc 11/10/09 BMP71 Quick Start Guide...
Shift + Alt Key Used together with an alpha key to access the top special character when two special characters exist on the key. Note: For accented letters, press Shift+Alt+Special Character, then type the letter. BMP71 Quick Start Guide 11/10/09...
Page 10
Print Preview Key Previews the label as it will look when printed. Feed Key Feeds the media through the printer to the next notch on the liner. (Feeds a full label for die cut; .5-inch for continuous.) 11/10/09 BMP71 Quick Start Guide...
Add a Label Adds a new label to a string of labels, inserting directly after the current label. Add an Area Adds a new area to a label. This can only be performed on continuous labels. BMP71 Quick Start Guide 11/10/09...
Setup Key Defines the printer’s default parameters and activates specific applications. Printing a Label To print a label: 1. Press PRINT To cut the label: 2. Pull the cutter lever up, as far as it will 11/10/09 BMP71 Quick Start Guide...