Create A Completely New Rhythm - Technics SX-PR54/M Operating Instructions Manual

Part IV

Create a completely new rhythm

Clear the memories and compose a completely new rhythm from scratch.
• You can also use this method when copying a pattern from a preset rhythm or the SEQUENCER.
Prepare to record
1.
On the COMPOSER MENU display, select a
memory in which to record (RECORDING
MEMORY A, B, or C).
• The display looks similar to the following.
2.
Use the buttons below the display to select the
pattern you want to create.
• If the MEM CLR button is pressed, all the current con-
tents of the MEMORY (A/B/C) are erased (a confirmation
display appears).
• You can press the NAMING button and assign a name to
the MEMORY.
• To assign a name to each VARIATION, press the VARI
button and select a number.
3.
On the RECORD MEMORY display, press the
OK button.
• The display looks similar to the following.
4.
Press the CLEAR THE ENTIRE PATTERN
button.
• The display looks similar to the following.
82
QQTG0701
5.
Press the YES button.
• All the data for the selected pattern is erased.
6.
Press the MEASURE SETTING button.
∧
7.
Use the MEASURE
ify the number of measures in your new
rhythm pattern (1 to 16).
8.
Use the TIME SIGNATURE
to specify the meter of the pattern (1/4 to
8/4).
• When the settings for the MEASURE and TIME SIGNA-
TURE of the INTRO or ENDING patterns are changed,
the Maj and Min settings change at the same time.
9.
Press the OK button.
10.
Press the EXIT button.
Composer
∨
and buttons to spec-
∧ ∨
and buttons