Panel Memory - Technics SX-PR54/M Operating Instructions Manual

Part II

Panel Memory

PANEL MEMORY stores all the current panel settings so you can recall them at the push of a button.
How to store the panel settings
By storing all the panel settings you use for a
song in the same bank, for example, you can
switch from one panel setup to the next in a
flash.
1.
Set up the desired panel settings (sounds, vol-
umes, etc.)
2.
Use the BANK button to select a bank (A, B,
C).
A B
BANK
• Lighting up both the A and B indicators enables C to be
selected.
3.
With the SET button held down, press one of
the numbered buttons
MEMORY (1 to 8).
C
A B
BANK SET 1 / 5
PANEL MEMORY
• Turning the P.MEM 5-8 button ON enables the selection
of panel settings for numbers 5 to 8.
• The panel settings are now stored in the specified bank
and number.
BANK VIEW
Select one of the numbered buttons marked
PANEL MEMORY and hold it down for several
seconds to check the 8 memory names of the
selected bank.
∧
• You can use the BANK
banks.
52
QQTG0701
C
SET
of the PANEL
P.MEM 5-8
2 / 6 3 / 7 4 / 8
∨
and buttons to view other
AUTO PLAY CHORD APC/SEQUENCER FADE RHYTHM GROUP TEMPO / PROGRAM
VOLUME
SPLIT ONE TOUCH SOUND FUNK & BALLROOM
MAIN POINT MODE OFF/ON PLAY IN OUT ARRANGER METRONOME POP ROCK SOUL DISCO POP BALLAD BALLAD & SHOW
VOLUME
MAX
MAX
SET
CHORD FINDER
PROGRESSIVE WALTZ JAZZ & LATIN &
PIANIST PIANO STYLIST 8 BEAT 16 BEAT USA & TRAD SWING WORLD MEMORY
CONTRAST
OFF
MIN
LOAD
1 2 3 4 1 2 1 2 1 2 3 4 BEAT
DEMO +
MUSIC STYLE ARRANGER VARIATION FILL IN INTRO & ENDING SYNCHRO & BREAK START / STOP TAP TEMPO - TRANSPOSE HELP OTHER PARTS/TR
MUTE
SEQUENCER COUNT
RESET INTRO
• You can use the bank names on PAGE 1/2 to select the
bank.
Assign a name to the bank/memory
You can assign names to the banks and memo-
ries.
1.
Select one of the numbered buttons marked
PANEL MEMORY and hold it down for sev-
eral seconds.
2.
Press the BANK NAMING button to assign a
name to the bank, or the MEMORY NAMING
button for the memory.
• The display looks similar to the following.
3.
Use the buttons below the display to assign a
name.
• Set the character input position with the POSITION but-
tons, select the characters with the alphanumeric buttons
and repeat name assignment.
• Switch from upper to lower case letters with the ABC, abc
button.
• Use the !#$ button to switch to the symbols character set.
• Press the INS button to enter a space at the cursor posi-
tion.
• Press the DEL button to erase the character at the cursor
position.
• Press the CLR button to erase the entire name.
• Press the →← button to center the name.
4.
When you have finished assigning the name,
press the OK button.
Playing the rhythm
SOUND GROUP SEQUENCER
GUITAR & SAX & ORGAN & SOUND EASY
PROGRAM DISK
STRINGS VOCAL HARPSI BRASS WOODWIND ACCORDION SYNTH EXPLORER PLAY REC FAVORITES MENUS DISK IN USE
LOAD
CHORD STEP REC
MALLET & PIANO ORCH DIGITAL CONDUCTOR DIGITAL MULTI
BASS ORCH PERC WORLD MIXTURES MIXTURES DRAWBARS DRUM KITS MEMORY LEFT RIGHT 2 RIGHT 1 EFFECT EFFECT CHORUS REVERB
P.MEM 5-8
C
A B
DISPLAY HOLD EXIT GRAND UPRIGHT ELECTRIC MODERN SIMPLE PIANO TECHNI-CHORD BANK SET 1 / 5 2 / 6 3 / 7 4 / 8
PAGE
PIANO PANEL MEMORY