Menu Display - Technics SX-PR54/M Operating Instructions Manual

PAGE
When there are additional parts to the current
display, a page number indication, for example
PAGE1/2, appears in the upper right corner of
the screen. For example, 1/2 indicates that there
are two pages of the display, and the current
page is page 1. In this case, you can use the
upper and lower PAGE buttons, to the right of
the balance buttons, to view different "pages" of
the display.
• Press the upper button to view the next page of the dis-
play, and the lower button to view the previous page of
the display.
• On the last page of the display, pressing the upper button
returns to the first page. And conversely, on the first page
of the display, pressing the lower button will skip to the
last page.

Menu display

The PROGRAM MENUS button controls multiple
functions. Press the button to access its menu
display.
PROGRAM
MENUS
Example of menu display: PROGRAM
MENUS
Select a function from the menu display by
pressing the corresponding button to the left or
right of the display indicated by the
arrows.
• In this manual, the steps describing how to select a func-
tion from a menu display are generally abbreviated as fol-
lows, for example: "On the PROGRAM MENUS display,
select SOUND."
28
QQTG0701
Setting display
When you select an item from the menu display,
the setting display for the item is shown.
The buttons to the right, left and/or directly below
the display are used to select and adjust the set-
tings.
PAGE
Press the button corresponding to the
ton on the display to change the value.
TEMPO/PROGRAM
If the TEMPO/PROGRAM indicator is lit while
you are using the display to adjust the setting, it
indicates that this dial can be used to quickly
change the displayed value or setting.
and
EXIT
While the setting display is shown, press this but-
ton to go back to the previous display.
Example of setting display: MASTER
TUNING
MUTE
• In this manual, this procedure is written as follows: "Use
∧ ∨
the and buttons to adjust the pitch."
TEMPO / PROGRAM
• The setting which can be adjusted is highlighted on the
display.
DISPLAY HOLD EXIT
∧ ∨
or but-