Technics SX-PR54/M Operating Instructions Manual page 79

Part III
5.
Use the CHANGE TO
specify the pitch you wish to change to.
6.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
VELOCITY CHANGE
Modify the recorded velocity in specific mea-
sures of specific tracks.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEAS
specify the start point (measure number) of
the velocity change.
∧
3.
Use the LAST MEAS
ify the end point (measure number) of the
velocity change.
∧
4.
Use the VELOCITY and
the change in velocity.
• The value you select will be added to or decrease from
the current velocity.
5.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
TRANSPOSE
Change of key of specific measures of specific
tracks.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
∧ ∨
and buttons to
∨
buttons to select the
∧ ∨
and buttons to
∨
and buttons to spec-
∨
buttons to specify
∨
buttons to select the
2.
Use the FIRST MEAS
specify the start point (measure number) of
the transpose.
∧
3.
Use the LAST MEAS
ify the end point (measure number) of the
transpose.
4.
Use the TRANSPOSE
specify the change in pitch.
• Increments are in semitones. A value of 12 is one octave.
A – value lowers the pitch, and a + value raises it.
5.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
ADVANCE/DELAY
Speed up or delay the sound production of spec-
ified performance data.
∧
1.
Use the TRACK and
track you wish to edit.
• You cannot select the track for the CONTROL, RHYTHM
or CHORD part.
• If ALL is selected, all tracks will be edited.
2.
Use the FIRST MEAS
specify the start point (measure number) of
the change.
∧
3.
Use the LAST MEAS
ify the end point (measure number) of the
change.
4.
Use the ADVANCE/DELAY
to accelerate or delay the timing of the sound
production (–96 to +96).
• A + value causes the notes to sound later, and a – value
causes the notes to sound earlier.
5.
Press the OK button.
• The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the function.
Sequencer
∧ ∨
and buttons to
∨
and buttons to spec-
∧ ∨
and buttons to
∨
buttons to select the
∧ ∨
and buttons to
∨
and buttons to spec-
∧ ∨
and buttons
79
QQTG0701