Song Select; Punch Record - Technics SX-PR54/M Operating Instructions Manual

Part III

Song Select

You can select a desired song from the list of recorded songs.
1.
On the SEQ MENU display, select RECORD
& EDIT.
2.
On the RECORD & EDIT display, select
SONG SELECT.
• The display looks similar to the following.

Punch Record

If you make a playing error during REALTIME RECORD or would like to change the recording for some
other reason, you can use the punch recording feature to correct a selected portion of the performance
without having to redo the whole part.
Recording the performance
Playback
1.
On the SEQ MENU display, use the SONG
∧ ∨
SELECT and buttons to select the song
number. Then select RECORD & EDIT.
2.
On the RECORD & EDIT display, select
PUNCH RECORD.
• The display looks similar to the following.
3.
Select the track which contains the portion you
want to correct.
• You cannot select a track in which no data is stored.
64
QQTG0701
Use the SONG SELECT L and M buttons to
3.
select a song.
• The total amount of memory used for the current song is
shown as a percentage (%) to the right of the song name.
• If the NAMING button is pressed, the NAMING display
appears.
• To optimize memory, songs you do not wish to preserve
should be deleted. (Refer to page 72.)
Playing error
Punch in
Replay this portion
Recording mode
• On the display "REC" indicates tracks which are being
recorded, and "PLAY" indicates tracks which are being
played back.
4.
Use the MEAS
beginning measure of playback.
• "MEASURE=" indicates the current measure number.
5.
Press the START/STOP button to begin play-
back of the specified track.
6.
During playback, press the PUNCH IN button
at the point you want to begin recording.
• Recording begins as soon as the PUNCH IN button is
pressed. Begin playing at this point.
• The REC indication changes to the PUNCH indication.
• The PUNCH IN button switches to the REC STOP button.
Sequencer
Punch out
∧ ∨
and buttons to specify the