Using The Bounce Function - Tascam DP-004 Owner's Manual

7–Recorder Functions
Source tracks are erased when they are bounce
destinations. (In the illustration above the drum parts
are overwritten by the stereo mix). However, you
can use the unit's (undo) function to return to the
previous state if you make a mistake (see "Undoing
the last operation (single undo)" on page 66).

Using the bounce function

1 Press to open the
REC MODE
70
TASCAM DP-004
Can be Can be
overwritten overwritten
screen.
RECORDER MODE
2 Turn the wheel to select
DATA
3 Press the key to put the unit in bounce
F4 ( )
EXEC
mode and return to the Home Screen.
4 Press the keys for the bounce destination
REC
tracks (the indicators light).
For a stereo bounce, press the
1 and 2 or tracks 3 and 4. For a mono bounce
(bouncing the mix to a single track) press the
key for any one track.
5 Adjust the and
LEVEL
source tracks.
For mono bounces all sounds will be panned all
.
BOUNCE
keys for tracks
REC
knobs for the bounce
PAN
REC