6-Basic Recording; Selecting The Input Source - Tascam DP-004 Owner's Manual

6–Basic Recording

Selecting the input source

This unit has two input channels (
) that can be selected separately as input sources.
B
The built-in microphones (front panel
) and external input signals (input through
MIC B
the rear panel and
INPUT A
be selected as input sources. Mic, line and guitar
signals can be input through the
The switch on the left side panel
MIC/LINE–GUITAR
must be set accordingly. Moreover, the sensitivity
can be set when using the built-in mics.
1 When the transport is stopped and the Home
Screen is open, press the
the screen.
INPUT SETTING
Use the and
IN A IN B
for the and
INPUT A INPUT B
54
TASCAM DP-004
and
INPUT A INPUT
and
MIC A
connectors) can
INPUT B
channel.
INPUT A
key to open
INPUT SETTING
items to set the input sources
channels.
2 Use the (§) and
F3 F4
setting, and turn the
IN B
input source.
selection choices
IN A
: input OFF
OFF
: built-in
MIC A
INT . MIC A-Low
: built-in
MIC A
INT . MIC A-Mid
: built-in
INT . MIC A-Hi gh
: guitar or line signal (through
GUITAR/LINE
connector)
: external mic (through
MIC
IN B selection choices
: input OFF
OFF
: built-in
MIC B
INT . MIC B-Low
: built-in
MIC B
INT . MIC B-Mid
: built-in
INT . MIC B-Hi gh
: line (through
INPUT B
LINE
: external mic (through
MIC
3 After changing the setting, press the
return to the Home Screen.
4 If a source that uses the
(¶) keys to select the
IN A
wheel to select the
DATA
(low sensitivity)
(middle sensitivity)
(high sensitivity)
MIC A
INPUT A
connector)
INPUT A
(low sensitivity)
(middle sensitivity)
(high sensitivity)
MIC B
connector)
connector)
INPUT B
key to
HOME
connector is
INPUT A
or