Tascam DP-004 Owner's Manual page 101

NOTE
If there is no stereo master, an error message appears.
3 Use the keys, the
Ô
/
and keys to edit the name of the stereo master
F4
file being exported (See "Editing names" on page
43).
4 After setting the name, press the
stereo master file is exported as a 16-bit, 44.1-kHz,
stereo WAV file to the FAT partition. The file name
of the exported file is the name set in step 3 above
plus the ".WAV" extension.
NOTE
To cancel exporting, press the F1 (BACK) key.
5 Connect this unit to a computer using the USB
cable (see "Connecting with a computer" on page
92).
11–Exchanging Data with a Computer
wheel and the
DATA F3
key. A
F2 ( )
EXEC
6 Use the computer to copy the stereo master file
from the WAVE directory on the FAT partition of
the unit to the computer.
7 After copying finishes, disconnect the unit from
the computer using the proper procedures and then
remove the USB cable (see "Disconnecting" on
page 93).
101
TASCAM DP-004