Making The First Recording - Tascam DP-004 Owner's Manual

6–Basic Recording
1 Press to open the
ASSIGN
As shown above, the input channel that is the
recording source for each track (1–4) is shown.
In the initial setting,
recording source for tracks 1 and 3, and
assigned as the recording source for tracks 2 and 4.
2 Use the (§) and
F3 F4
change its current input channel.
3 Turn the wheel to set the input to
DATA
58
TASCAM DP-004
screen.
INPUT ASSIGN
is assigned as the
INPUT A
INPUT B
(¶) keys to select a track to
or
IN A
4 When finished making settings, press the
key to return to the Home Screen.

Making the first recording

Before following recording procedures below,
confirm that the source that you want to record is
connected, and that the input channel is assigned a
recording source for a track. Monitoring headphones
should also be connected.
is
1 Press the
REC
indicator blinks red (that status is called
REC
"record standby"). A maximum of two tracks can
be recorded simultaneously. If you press a different
key when the
REC
.
IN B
already blinking, the track that was put into record
standby first will become inactive and the
indicator will turn off.
key of the track to record on. The
indicators of two tracks are
REC
HOME
REC