Restoring Songs - Tascam DP-004 Owner's Manual

11–Exchanging Data with a Computer
6 Connect this unit to a computer using the USB
cable (see "Connecting with a computer" on page
92).
7 Use the computer to copy backup files from the
BACKUP directory on the FAT partition of the
unit to the computer.
8 After copying finishes, disconnect the unit from
the computer using the proper procedures and then
remove the USB cable (see "Disconnecting" on page
93).
CAUTION
• If you change the song file name on the computer,
you might have trouble when you restore the file
to this unit later.
• If you do change the file name of the backed-up
song file, do not use more than eight characters in
the new name.
TIP
• You can make further backup copies of the song
file by copying it from the computer to a CD-R, for
example.
• You can also restore a backed-up song file to a differ-
ent DP-004 unit. Since files can be shared freely
between DP-004 units, you can easily conduct over-
dubbing or mixdown at different locations.
96
TASCAM DP-004

Restoring songs

Basically, restoring is the reverse of backing up. In
short, transfer a backup file on a computer to this
unit to restore a song.
1 Connect this unit to a computer using the USB
cable (see "Connecting with a computer" on page
92).
2 Use the computer to copy backup files from the
computer to the BACKUP directory on the FAT
partition of the unit.
3. When copying finishes, disconnect the unit from
the computer using the proper procedures and then
remove the USB cable (see "Disconnecting" on page
93).
4 After this unit restarts automatically, press
to open the screen. Turn the
MENU
select and press the
DATA BACKUP
5 Turn the wheel to select
DATA
press the (¥) key.
F4
The screen shows the backup files on the FAT
partition.
MENU
wheel to
DATA
(¥) key.
F4
, and
SONG RESTORE