Initializing Sd Cards - Tascam DP-004 Owner's Manual

(¥) key to open the
CARD
3 Turn the wheel to select
DATA
press the (¥) key.
F4
A pop-up message warning that all data on the
FAT partition will be erased appears.
4 Press the key to reformat the FAT partition.
F3 ( )
YES
When reformatting finishes the
•
reopens.
To cancel reformatting, press the
•
of the key.
F3 (
)
YES

Initializing SD cards

If you want to use an SD card that was used with
this unit, we recommend that you initialize it.
When you initialize an SD card, the entire card is
menu screen.
, and
FAT REFORMAT
menu screen
CARD
key instead
F4 ( )
NO
9–SD Card Management
formatted as FAT32.
1 With the transport stopped and the Home Screen
open, press the
MENU
2 Turn the wheel to select
DATA
(¥) key to open the
CARD
3 Turn the wheel to select the
DATA
item and press the
F4
A pop-up message warning that all data on the
card will be erased appears.
4 Press the key to initialize the entire card
F3 ( )
YES
and format it as FAT32.
To cancel initialization, press the
•
of the key.
F3 (
)
YES
CAUTION
If you want to use the card with a DP-004 again you
will need to format it (see "Formatting SD cards" on
page 38).
key to open the screen.
MENU
, and press the
CARD
menu screen.
SD INITIALIZE
(¥) key.
key instead
F4 ( )
NO
TASCAM DP-004
F4
85