Tascam DP-004 Owner's Manual page 65

6 Turn the wheel to select
DATA
7 Press the key to put this unit into master
F4 ( )
EXEC
playback mode and return to the Home Screen.
8 Press the playback (Á) key to play the stereo
master that you created. The stereo master sound is
output through the
also be dubbed to an external stereo recorder.
9 If you are satisfied with this stereo master, press
the key to open the
REC MODE
Turn the wheel to select
DATA
the key to put the unit into multitrack
F4 ( )
EXEC
mode (ordinary mode) again and return to the
Home Screen.
If you do not like the stereo master you made,
follow the above procedures to make a master
recording again. The new stereo master replaces
the previous stereo master.
.
MASTER PLAY
/ connector, so it can
LINE OUT
screen.
RECORDER MODE
and press
MUL TI TRACK
6–Basic Recording
NOTE
To listen to the recorded stereo master in a saved song,
load the song, set the recorder mode to MASTER PLAY
and press the playback (
Á
TIP
• When making a master recording, you can play along,
for example, with the mixdown signal and input that
sound through INPUT A or B to mix it with prere-
corded tracks when creating a stereo master.
• If you want to turn the unit OFF after mastering,
you do not need to return to MULTI TRACK mode in
procedure 9 above. Regardless of the mode when
shutdown, the next time the power is turned ON, it
will start in MULTI TRACK mode.
• You can transfer the master mix created on this unit
as a file that can be played back on a computer (see
"Exporting a stereo master" on page 100).
• A stereo master can be copied to any track pair
among tracks 1–4 by creating a "clone" track (see
"CLONE TRACK (track duplication)" on page 87).
) key to start playback.
TASCAM DP-004
65