Tascam DP-004 Owner's Manual page 98

11–Exchanging Data with a Computer
4 After this unit restarts automatically, press the
key to open the
MENU
wheel to select , and press the
WAVE
open the menu.
WAVE
5 Turn the wheel to select
DATA
press the (¥) key.
F4
WAV files on the FAT partition are shown.
NOTE
• This unit cannot use stereo WAV files or those that are
a sampling frequency other than 44.1 kHz. Such files
are not displayed even if they have been imported.
If no files that can be imported are on the FAT
partition, a pop-up saying "Import File Not Found"
appears.
• If the file name is short, spaces appear after the file
name on the FAT partition, but those spaces are not
included in the actual file name.
6 Turn the wheel to select the WAV file that you
DATA
98
TASCAM DP-004
screen. Turn the
DATA
MENU
(¥) key to
F4
, and
IMPORT TRACK
want to import, and press the
The amount of open space on the currently active
partition and the size of the selected WAV file
appear on the display.
7 Turn the wheel to select the track that you
DATA
want to import the WAV file to, and press the
key.
( )
EXEC
NOTE
• If there is not enough open space or the file format is
wrong, an error message appears.
• The track that is the destination for the import must
be empty.
This unit reads the file from the FAT partition, and
imports it to the designated track. The beginning of
the file is set at the start of the song (00:00:00:00).
In the same way as other recording tracks, you can
edit the track that has received the imported file (see
"10-Editing tracks" on page 86).
key.
F2 ( )
NEXT
F4