Tascam DP-004 Owner's Manual page 107

Messages
No Disk Space
No Master T rk
No Song
No Undo History
Not Stopped
Now Recording
Same T rack
Song Protected
T oo Many songs
T rack Ful l
T rk T oo Short
No SD Card
I
nval id Card
Protected Card
Card Ful l
T rk Edi t F ai l
Battery Empty
13–Specifications & Messages
You tried to create a song, but there is not enough space on the partition to create a song ("Creating a new
song" on page 49). Free up some space and try again.
You have tried to use a non-existent master track as the source in a track cloning operation ("CLONE
TRACK" on page 87). Select another source or master the song and try again.
You are trying to load a song from a partition that has no songs on it ("Loading a saved song" on page 48).
Change partitions ("Selecting the active partition" on page 47).
There are no actions to be undone. See "Undoing operations" on page 66.
The transport is moving (not stopped, but playing back, recording, etc.) and you have pressed a key such as
the UN/REDO key which cannot be used until you press STOP.
You are trying to perform an action which cannot be done while recording.
You cannot clone a track to itself. ("CLONE TRACK" on page 87.)
The song is protected ("Protecting songs" on page 53) and you are trying to change it (record or edit, etc.).
Unprotect the song.
You have 250 songs on one partition. You must delete some before you can create another song.
You are trying to import a file from the FAT partition to a track that has already been recorded to ("Importing
tracks" on page 97). You can only import to a blank track.
You are trying to master with the OUT point at the zero position ("Mixdown" and "Mastering" on page 62). Set
the OUT point ("Setting IN and OUT points" on page 73) and try again.
Insert an SD card after turning off the unit.
Insert another SD card after turning off the unit, or format the card by MENU
To record or edit, turn off the unit and un-protect the SD card.
The SD card is full during recording.
Save the song and turn the unit off and then on, and perform track edit again.
Replace the batteries with new ones or use a PS-P520 AC adapter (sold separately).
Meaning and remedy
® ®
.
CARD FORMAT
107
TASCAM DP-004