Table of Contents
Advertisement
8
CABINET TROLLEY ASSEMBLY
1.
Study the assembled diagram and check the parts
as listed. Identify and separate into groups.
DO NOT TIGHTEN BOLTS UNTIL ALL FITTINGS
ARE IN POSITION.
2.
Secure right-angled brace to trolley leg with four (4)
screws for each brace.
3.
Install the bottom shelf between trolley legs.
Position the wheel-side trolley leg assembly with
wheel axle bolt opening to the right hand side and
the castor-side trolley leg assembly with castor
mounting block to the left side. Ensure holes for
magnetic door stopper are facing the front. See
diagram 3. Secure loosely with 65 mm phillips-
head bolts and nuts provided.
4.
Fix magnetic door stopper to base tray using two
(2) small nuts and bolts provided.
5.
Attach the rear panel to the trolley legs as shown in
diagram 2. Do not tighten screws.
6.
Position partially assembled trolley on its rear.
Fasten the wheel to the trolley leg as shown in
diagram 3 with the long bolt and nylon nut provided.
Be sure to insert the washer onto the axle bolt so
that it is positioned between the trolley leg and
securing nut. Clip the hubcap onto the wheel and
repeat steps for second wheel.
7.
Secure the castor to the bottom of the castor-side
trolley leg by turning the threaded castor stem
clockwise until it fully stops. Fasten firmly using
the securing tool provided.
8.
Tighten all bolts and nuts thoroughly, securing the
base tray. The partly assembled trolley is now
ready to connect with the barbecue body.
9.
You are now ready to install the barbecue into the
trolley. Remove all the loose contents from inside
the barbecue body to lighten the weight.
A
S
S
E
M
B
L
Y
Diagram 1.
Magnetic
door stopper
Diagram 2.
Diagram 3.
Castor
Right-angled
brace
Wheel-side
trolley leg
Rear panel
mounting
holes
Castor-side
trolley leg
Attach with
2 screws
either side
internally
Rear panel
Hubcap
Wheel
8
Advertisement
Table of Contents
