TANDBERG Videoconferencing System
Installation
Connecting cables
All cables needed in standard configuration are
connected to the codec. Connect these cables to the
other parts of the system:
1. Power cable
Connect the system power cable and monitor power
cable to an electrical distribution socket.
2. Monitor cables
Connect the S-video cable to the input on your monitor
(see drawing). For Scart-monitors, use the Scart-
adapter. Only a video cable is needed since the
Natural Audio Module amplifies the audio.
1
3. Microphone cable
Connect the microphone cables to the microphones.
3
6
5
2
4. Camera cable
4
Connect the camera cable from the S-Video output on
the camera to the S-Video input 'Main Cam' on the
codec. Connect also the control cable between the RJ-
45 on the camera, and the Dataport 1 on the codec.
15