TANDBERG 6000 User Manual page 39

End a Duo Video call
disconnect To end a Duo Video call, press D
connection or the whole connection.
Controlling camera, changing video source and presets in a Duo Video call
The main monitor will display incoming video and the 2nd monitor will display outgoing video (Duo Video in full
screen / Main local video in PIP) when using a dual monitor system. For a single monitor system the Duo Video
will be shown in full screen and the incoming video in PIP.
Pressing S will toggle the full screen / PIP video streams. Pressing S
ELFVIEW
the main monitor in a dual monitor setup.
Controlling the camera, changing video source and using presets will affect the video source currently displayed in
full screen mode.
E : I D V
XAMPLE F UO IDEO IS SHOWN IN FULL SCREEN ON THE
V . I
IDEO SOURCE F THE MAIN CONNECTION IS SHOWN IN FULL SCREEN
.
CONNECTION SOURCE
If both connections are selected to display the same video source, Duo Video will be closed.
TANDBERG Videoconferencing System
. Select if you want to disconnect only the Duo Video
ISCONNECT
2 ,
ND MONITOR
,
PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE THE MAIN
39
will not change anything on
ELFVIEW
PRESSING ANY OF THE VIDEO SOURCE BUTTONS WILL CHANGE
General use
D
UO