TANDBERG 6000 User Manual page 71

TANDBERG Videoconferencing System Advanced use
If you want to use your system via Leased E1/T1, you should select 'Current Network: Leased E1/T1' and enter
the 'Leased E1/T1 Settings' menu to set the Leased E1/T1 parameters.
NOTE
B 'L E1/T1' 'ISDN-PRI' 'E1/T1'.
OTH EASED AND USES THE SAME PHYSICAL INTERFACE ON THE CODEC MARKED
If you want to use special networks and connect using RS449, V.35, X.21 or connect to ISDN via an external
IMUX you should select 'Current Network: External' and enter the 'External Network Settings' menu to set
the External Network parameters.
71