Connecting Cables - TANDBERG 1000 MXP User Manual

2.2 Connecting Cables

1. Power cable
 Connect the power supply
to the DC in input on the
system.
 Connect the power cable
to the power supply.
 Connect the power cable
to an electrical distribution
socket.
2. ISDN cables
 Connect the ISDN cables
to the ISDN connectors on
the system.
 Connect the ISDN cables
to the ISDN sockets (S/T-
interface) provided by the
service provider. Your
main number will be the
number associated with
the socket to which ISDN
cable number 1 is
connected.
North America: The system does
not have a built-in network
terminator. If your wall socket
provides you with an ISDN U-
interface, you will need an NT1
between your system and your
ISDN line, see Appendix 9
details.
Note! Write down the
numbers associated with
each of the ISDN lines. You
will need them later to
configure the system
Installation
for
8