Advanced use
TANDBERG Videoconferencing System
If 'Far End Loop' is set to 'RequestRemote' while in a call and the call is subsequently disconnected, 'Far End
Loop' will be set to 'Off'.
System Selftest
The system performs a check to determine internal hardware integrity. Test Network is useful when you want to
check if your network connection is active.
View Current Settings
This window will display all the system settings. Use the arrow key on the remote control to scroll through the
list.
Restore defaults
You may restore all system settings to the factory default using this function.
T
C
D
, N
T
, L
S
SPID
NOTE
HIS DEFAULT SETTING WILL NOT AFFECT YOUR
ALL
IRECTORY INFORMATION
ETWORK
YPE
INE
ETUP NUMBERS OR YOUR
NUMBERS
IP Address Conflict Check
The codec will give a warning if there is an IP conflict. This check may be initiated by the user by selecting IP
Address Conflict Check.
100