ICC XLTR-1000 Instruction Manual page 91
Miltiprotocol rs-485 gateway
Hide thumbs
Also See for XLTR-1000:
- Instruction manual (104 pages) ,
- Quick start manual (8 pages) ,
- Instruction manual (54 pages)
Table of Contents
Advertisement
ICC
o
Remap floor 1's command data registers:
Finishing Up
•
Configure the "RS-485 B" port for the other protocol to be used in accessing
the floors of the building.
•
Download the configuration to the gateway (see section 8.1 for more
information on downloading a configuration to a device).
•
Enter "3003" into the Start Reg field.
•
Enter "3" into the Num Regs field.
•
Enter "112" into the Database Addr field.
•
Click Create.
90
Advertisement
Table of Contents
