ICC XLTR-1000 Instruction Manual page 78

ICC
o Create output objects for floor #1's command data
For the first object, enter the following:
•
•
•
•
•
•
•
Repeat these steps for the other two AO objects, increasing the
Object Name by 1, Instance by 1, and Database Addr by 4 each
time.
o Create input objects for floor #2's monitor data
For the first object, enter the following:
•
•
•
•
•
•
•
Repeat these steps for the other two AI objects, increasing the
Object Name by 1, Instance by 1, and Database Addr by 4 each
time.
o Create output objects for floor #2's command data
For the first object, enter the following:
•
•
•
•
•
•
•
Repeat these steps for the other two AO objects, increasing the
Object Name by 1, Instance by 1, and Database Addr by 4 each
time.
o Create input objects for floor #3's monitor data
For the first object, enter the following:
•
•
•
•
Select Analog Output from the Type selection group.
Enter "F1 Cmd Data 1" into the Object Name field.
Enter "1" into the Instance field.
Enter "100" into the Database Addr field.
Select 32-bit Unsigned from the Data Type dropdown
menu.
Enter "1" into the Multiplier field.
Click Create.
Select Analog Input from the Type selection group.
Enter "F2 Mon Data 1" into the Object Name field.
Enter "4" into the Instance field.
Enter "12" into the Database Addr field.
Select 32-bit Unsigned from the Data Type dropdown
menu.
Enter "1" into the Multiplier field.
Click Create.
Select Analog Output from the Type selection group.
Enter "F2 Cmd Data 1" into the Object Name field.
Enter "4" into the Instance field.
Enter "112" into the Database Addr field.
Select 32-bit Unsigned from the Data Type dropdown
menu.
Enter "1" into the Multiplier field.
Click Create.
Select Analog Input from the Type selection group.
Enter "F3 Mon Data 1" into the Object Name field.
Enter "7" into the Instance field.
Enter "24" into the Database Addr field.
77