ICC
2. Features
Supported Protocols
The gateway currently provides support for the following fieldbus protocols:
•
A.O. Smith AIN Slave
•
A.O. Smith PDNP Master
•
BACnet MS/TP Client
BACnet MS/TP Server
•
•
TCS Basys Master
•
MSA Chillgard Monitor
•
DMX-512 Master
•
DMX-512 Slave
•
M-Bus ("Meter-Bus") Master
•
Johnson Controls Metasys N2 Master
•
Johnson Controls Metasys N2 Slave
•
Modbus RTU Master
•
Modbus RTU Slave
•
Modbus RTU Sniffer
•
Siemens FLN Slave
•
Sullair Supervisor Network Master
•
Toshiba ASD Protocol Master
Note that any combination of these protocols may be configured on the gateway's
"RS-485 A" and "RS-485 B" ports.
Supported Baud Rates
The gateway currently provides support for the following baud rates:
•
300
•
600
•
1200
•
2400
•
4800
•
9600
Note that not all protocols support every baud rate listed above. Refer to section
9 for more information.
Field-Upgradeable
As new firmware becomes available, the gateway can be upgraded in the field by
the end-user. Refer to section 8.1 for more information.
USB Interface
The gateway can be connected to a PC via a USB mini type-B cable. This
simultaneously supplies power while providing the ability to configure the
•
19200
•
38400
•
57600
•
76800
•
115200
8