Rigid Boot Cover; Variable Loading Floor In The Boot - Skoda KAMIQ 2020 Owner's Manual

Replace batteries
NOTICE
New batteries must comply with the specifications
of the original battery.

Rigid boot cover

Remove and insert
The maximum load of the other fastening nets is
1 kg.
Removing
Inserting
›
Insert the cover until it clicks into place.
›
Hook in the retaining straps.
Storage space and interior equipment ›
›
Pry off the cover with a
narrow, pointed object
in the area of the ar-
row.
›
Replace the batteries.
›
Fit the cover and click
into place.
›
Unhook the straps.
Remove the cover by
pulling it quickly.
The cover is released by
slowly pulling on the
floor of the boot.
Store the cover behind the rear seats

Variable loading floor in the boot

Setting the position
The maximum load of the variable loading floor is
75 kg.
Set the variable loading floor to the upper or lower
position
Rigid boot cover 163
›
Hook the cover behind
the rear seats.
›
Lift the variable load
floor and pull it to-
wards you.
›
To set in the upper po-
sition, position the vari-
able loading floor in the
front area on area .
A
›
To set in the lower po-
sition, position the vari-
able loading floor in the
front area on space .
B
›
Press the variable load-
ing floor forward and
hang up.