Power Button/Usb Board - HP Pavilion Gaming 15 Series Maintenance And Service Manual

Power button/USB board

Table 6-7 USB board description and part number
Description
Power button/USB board for use in ghost white models
Power button/USB board for use in acid green models
Power button/USB board for use in ultra violet models
Before removing the power button/USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Disconnect the battery (see
4. Remove the hard drive (see
Remove the power button/USB board:
1. Disconnect the cable from the ZIF connector on the power button/USB board (1).
2. Remove the two Phillips M2.0 × 2.0 screws (2) that secure the board to the computer.
3. Remove the power button/USB board from the computer (3).
Reverse this procedure to install the power button/USB board.
44 Chapter 6 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 37).
Hard drive assembly on page
27).
28).
33).
Spare part number
L72694-001
L72695-001
L72696-001