2.
Lift the TouchPad to remove it from the computer (2).
Reverse this procedure to install the touchpad.
USB/power button board
To remove the USB/power button board, use this procedure and illustration.
Table 5-12
USB/power button board and cable descriptions and part numbers
Description
USB/power button board
USB/power button board cable
Before removing the USB/power button board, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the rubber feet (see
3.
Remove the bottom cover (see
4.
Remove the battery (see
To remove the USB/power button board:
1.
Disconnect the cable from the board (1)
2.
Remove the two Phillips M2.0 × 3.0 screws (2) that secure the board to the computer.
Preparation for disassembly on page
Computer feet on page
Bottom cover on page
Battery on page
35).
32).
33).
USB/power button board
Spare part number
M75146-001
L23186-001
32).
45