Hard drive assembly
Table 5-4
Hard drive and connector descriptions and part numbers
Description
Hard drive, 1 TB, 7200 rpm
Hard drive, 1 TB, 5400 rpm
Hard drive connector/cable
Before removing the hard drive assembly, follow these steps:
1.
Prepare the computer for disassembly
2.
Remove the bottom cover (see
3.
Disconnect the battery (see
Remove the hard drive assembly:
1.
Disconnect the hard drive cable from the system board ZIF connector (1).
2.
Remove the three Phillips M2.0 × 2.5 screws (2) that secure the hard drive assembly to the computer.
3.
Lift the hard drive assembly out of the computer (3).
(Preparation for disassembly on page
Bottom cover on page
Battery on page
37).
27).
28).
Component replacement procedures
Spare part number
766644-005
762990-005
L72698-001
33