Usb/Card Reader/Power Button Board - HP 240 G7 Maintenance And Service Manual

USB/card reader/power button board

Description
USB/card reader/power button board
USB/card reader/power button board cable
Before removing the USB/card reader/power button board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display (see
Remove the USB/card reader/power button board:
1. Disconnect the cable from the ZIF connector on the USB/card reader/power button board (1).
2. Remove the two Phillips M2.0×3.0 screws (2), and then remove the board from the computer (3).
Reverse this procedure to replace the USB/card reader/power button board.
50 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 29).
Display assembly on page
27).
51).
Spare part number
L23196-001
L23186-001
26).