Fiat Fremont 2013 Owner's Handbook Manual page 78

control the volume of air circulated in the rear of the
KNOWING
vehicle.
YOUR
VEHICLE
Interior air enters the Rear Automatic
Temperature Control System through an
SAFETY
intake grille, located in the right side trim
panel behind the third row seats.The rear outlets
are located in the right side trim panel of the 3rd
STARTING
Row seat. Do not block or place objects directly in
AND
front of the inlet grille or heater outlets. The
DRIVING
electrical system could overload causing damage
WARNING
to the blower motor.
LIGHTS
AND
REAR TEMPERATURE CONTROL
MESSAGES
To change the temperature in the rear of the vehicle,
rotate the temperature knob counterclockwise to de-
IN AN
crease the temperature, and clockwise to increase the
EMERGENCY
temperature. The rear temperature settings are dis-
played in the Uconnect Touch™ system.
SERVICING
AND
When rear controls are locked by the Uconnect
CARE
Touch™ system , the Rear Temperature Lock symbol
on the temperature knob is illuminated and any rear
TECHNICAL overhead adjustments are ignored.
SPECIFICATIONS
CONTENTS
72
REAR MODE CONTROL
• Auto Mode
The rear system automatically maintains the correct
mode and comfort level desired by the rear seat occu-
pants.
• Headliner Mode
Air comes from the outlets in the headliner.
Each of these outlets can be individually adjusted
to direct the flow of air. Moving the air vanes of the
outlets to one side will shut off the airflow.
• Bi-Level Mode
Air comes from both the headliner outlets and
the floor outlets.
NOTE: In many temperature positions, the BI-LEVEL
mode is designed to provide cooler air out of the
headliner outlets and warmer air from the floor out-
lets.
• Floor Mode
Air comes from the floor outlets.
OPERATING TIPS
NOTE: Refer to the chart at the end of this section
for suggested control settings for various weather
conditions.