Table of Contents
Advertisement
In a single screen system, when a video mode (such as
DVD-video, Aux video, etc.) is active and Channel/
Screen 1 is selected using the remote control selector
switch, the first press of the remote control's MODE
button causes the Mode Selection menu to appear.
Numeric Keypad Menu
(fig. 113)
When the display for either Channel 1 or Channel 2
shows a direct action button, pressing the remote
control's ENTER button activates a numeric keypad
menu. This screen makes it easy to enter a specific
tuner frequency, satellite channel, or track number. To
enter the desired digit:
(fig. 113)
Numeric Keypad Menu
1. Press the remote control's navigation buttons (▴, ▾,
, ◂) to navigate to the desired digit.
2. When the digit is highlighted, press the remote
control's ENTER button to select the digit. Repeat
these steps until all digits are entered.
3. To delete the last digit, navigate to the Del button
and press the remote control's ENTER button.
4. After all of the digits are entered, navigate to the Go
button and press the remote control's ENTER but-
ton.
Disc Menu
When listening to a CD Audio or CD Data disc,
pressing the remote control's MENU button displays a
list of all commands which control playback of the disc.
Using the options you can activate or cancel play and
Random play.
Display Settings
(fig. 114)
When watching a video source (DVD Video with the
disc in Play mode, Aux Video, etc.), pressing the re-
mote control's SETUP button activates the Display
Settings menu. These settings control the appearance
of the video on the screen. The factory default settings
are already set for optimum viewing, so there is no
need to change these settings under normal circum-
stances.
KNOWING
YOUR
VEHICLE
SAFETY
STARTING
AND
DRIVING
WARNING
LIGHTS
AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND
CARE
TECHNICAL
SPECIFICATIONS
CONTENTS
159
Advertisement
Table of Contents
