Fiat Fremont 2013 Owner's Handbook Manual page 40

heated seat will automatically turn on when tempera-
KNOWING
tures are below 4.4° C. To make your selection, press
YOUR
the Auto Heated Seats soft-key, select On or Off
VEHICLE
followed by pressing the arrow back soft-key.
Engine Off Options
SAFETY
• Headlight Off Delay
Press the Headlight Off Delay soft-key to change this
STARTING
display. When this feature is selected, the driver can
AND
choose to have the headlights remain on for 0, 30, 60,
DRIVING
or 90 seconds when exiting the vehicle. To change the
WARNING
Headlight Off Delay status press the 0, 30, 60 or 90
LIGHTS
soft-key followed by pressing the arrow back soft-key.
AND
MESSAGES
• Engine Off Power Delay (for versions/markets,
where provided)
IN AN
Press the Engine Off Power Delay soft-key to change
EMERGENCY
this display. When this feature is selected, the power
window switches, radio, Uconnect™ phone system
SERVICING
(for versions/markets, where provided), DVD video
AND
system (for versions/markets, where provided), power
CARE
sunroof (for versions/markets, where provided), and
power outlets will remain active for up to 10 minutes
TECHNICAL
after the ignition is cycled to OFF. Opening either front
SPECIFICATIONS
vehicle door will cancel this feature. To change the
Engine Off Power Delay status press the 0 seconds, 45
seconds, 5 minutes or 10 minutes soft-key followed by
CONTENTS
pressing the arrow back soft-key.
34
Compass Settings
• Variance (for versions/markets, where provided)
Press the Variance soft-key to change this display.
Compass Variance is the difference between Magnetic
North and Geographic North. To compensate for the
differences the variance should be set for the zone
where the vehicle is driven, per the zone map. Once
properly set, the compass will automatically compen-
sate for the differences, and provide the most accurate
compass heading.
NOTE: Keep magnetic materials away from the top
of the instrument panel, such as iPod's, Mobile Phones,
Laptops and Radar Detectors. This is where the com-
pass module is located, and it can cause interference
with the compass sensor, and it may give false readings.
(fig. 13)
• Calibration (for versions/markets, where pro-
vided)
Press the Calibration key to change this setting. This
compass is self-calibrating, which eliminates the need
to manually reset the compass. When the vehicle is
new, the compass may appear erratic and the EVIC will
display CAL until the compass is calibrated. You may
also calibrate the compass by pressing the ON soft-key
and completing one or more 360–degree turns (in an
area free from large metal or metallic objects) until the